Thank you!
Your message has been sent.
Your message has been sent.
Exclusive supplier of ALLWEILER pumping equipment
World-class pump technologies
Contact us via e-mail:
Call us (English, Russian):
Our address:
ALLRUS Maschinenhandels GmbH, Campus 21, Brunn am Gebirge / Austria
Pumps which the world trusts
Selection and supply of ALLWEILER pumping equipment
for all industries in CIS since 1994
for all industries in CIS since 1994
For almost 30 years we have been supplying ALLWEILER pumps
to CIS: through our head office in Austria we effectively cooperate with customers from Azerbaijan, Georgia, Armenia, Uzbekistan, Turkmenistan, Kazakhstan and other countries.
We supply ALLWEILER pumps in various sizes for vertical and horizontal installation, as well as submersible pumps, which, thanks to the modular design, the design of the supports, the shaft seal and construction materials, adapt to all operating conditions.
to CIS: through our head office in Austria we effectively cooperate with customers from Azerbaijan, Georgia, Armenia, Uzbekistan, Turkmenistan, Kazakhstan and other countries.
We supply ALLWEILER pumps in various sizes for vertical and horizontal installation, as well as submersible pumps, which, thanks to the modular design, the design of the supports, the shaft seal and construction materials, adapt to all operating conditions.
Contact our specialist
Catalog
Product catalog
We will match the pump type, materials, seals and drive exactly to your requirements. From the variety of ALLWEILER products, you will receive exactly the pumps that are optimally suited to your specific application.
Centrifugal Pumps
Centrifugal Pumps are used to pump neutral or aggressive liquids, pure or contaminated liquids, cold or hot liquids, toxic, and environmentally hazardous liquids like water, hot water, lubrication oils, emulsions, thermal oils, and chemical products.
Functionality:
Single-channel, not self-priming, flow rates according to EN 733 or EN 22858/ISO 2858. Additional sizes expanded the EN performance ranges. Pump series are constructed in a modular design.
Functionality:
Single-channel, not self-priming, flow rates according to EN 733 or EN 22858/ISO 2858. Additional sizes expanded the EN performance ranges. Pump series are constructed in a modular design.
Request quotation
Screw Pumps
The two- and Three Screw pumps are used to pump
oils or other lubricating liquids, non-lubricating liquids, or liquids with poor lubricating properties. The characteristics of the screw pumps are the following:
self-priming, very high efficiency, very low noise level and very well suited for use withvariable speed drives (FU). The liquid is moved fullycontinuously, virtually without pulsations, without turbulence, crushing, or loss of lubrication.
Functionality
Single-/double channel, self-priming; the spindles have special shapes that create sealed chambers, the contents of which are continuously moved in an axial direction from the suction side to the pressure side as the spindles rotate. Despite rotation of the spindles, no turbulence results. The uniform chamber volumes eliminate crushing forces.
oils or other lubricating liquids, non-lubricating liquids, or liquids with poor lubricating properties. The characteristics of the screw pumps are the following:
self-priming, very high efficiency, very low noise level and very well suited for use withvariable speed drives (FU). The liquid is moved fullycontinuously, virtually without pulsations, without turbulence, crushing, or loss of lubrication.
Functionality
Single-/double channel, self-priming; the spindles have special shapes that create sealed chambers, the contents of which are continuously moved in an axial direction from the suction side to the pressure side as the spindles rotate. Despite rotation of the spindles, no turbulence results. The uniform chamber volumes eliminate crushing forces.
Request quotation
Propeller Pumps
Propeller pumps are used to pump neutral or aggressive liquids, pure or contaminated liquids, cold or hot liquids, and even pumped liquids with suspended solids.
Main Uses
Used to pump large volumes with a relatively short pump head up to 10 m.
Main Uses
Used to pump large volumes with a relatively short pump head up to 10 m.
Request quotation
Progressing Cavity Pumps
Used to pump or meter thin to highly viscous liquids,
pasty, neutral or aggressive, pure or abrasive liquids,
gaseous liquids or liquids that tend to foam, even liquids with fibrous and solid components.
Functionality
Self-priming progressing cavity pump, the pumping elements of which are the rotating rotor and the stationary stator. The special shape of these two parts creates sealed chambers, the contents of which are continuously moved in an axial direction from the suction side to the pressure side. Despite rotation of the rotor, no turbulence results; the consistent chamber volume eliminates crushing forces.
pasty, neutral or aggressive, pure or abrasive liquids,
gaseous liquids or liquids that tend to foam, even liquids with fibrous and solid components.
Functionality
Self-priming progressing cavity pump, the pumping elements of which are the rotating rotor and the stationary stator. The special shape of these two parts creates sealed chambers, the contents of which are continuously moved in an axial direction from the suction side to the pressure side. Despite rotation of the rotor, no turbulence results; the consistent chamber volume eliminates crushing forces.
Request quotation
Peristaltic Pumps
Used to pump or meter thin to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive liquids, gaseous liquids or liquids that tend to foam, even liquids with fibrous and solid components. Functionality: Dry self-priming, gasketless and valveless.
Request quotation
Macerators
Used to chop solids and produce pumpable liquids that contain fibers and solids. Functionality: A cutting wheel with exchangeable, highly wear resistant cutting discs. Depending on the type, static pressure head is 3 to 5 meters.
Request quotation
/
6
/
6
About us
Allrus Maschinenhandels GmbH │ Allweiler
Allrus Maschinenhandels GmbH is the official distributor of the oldest German pump manufacturer Allweiler GmbH, which is considered today to be the European market and technology leader in fluid handling solutions for shipbuilding, power generation and special industrial applications. Our product portfolio is unrivaled in the industry and includes centrifugal, propeller, screw spindle and progressive cavity pumps, as well as complete pump systems. We also offer peristaltic pumps and macerators.
We are proud to present a wide range of pumping systems, providing customized solutions tailored to the unique requirements of each project. Our team of experienced engineers and technicians is always available to advise you and offer the best solution for your needs.
Consulting
We listen to your requirements and help you select the pumping equipment that optimizes your performance and efficiency.
REQUEST INFORMATION
Spare parts
Our team of experienced professionals is ready to find the right parts to get your system up and running again.
REQUEST INFORMATION
Mobility
Mobile pumps are available for special applications, including emergency situations.
REQUEST INFORMATION
Equipment
The pumps are available with bearing supports or in block design for combination with a gearmotor, as well as with a stepless speed variator. Delivery options are also available with a gearbox equipped with a rotation frequency converter.
REQUEST INFORMATION
/
4
/
4
Why us?
The largest international corporations trust us
The priority of the Allrus Maschinenhandels GmbH is to maintain a balance between the high quality of the products we supply and the competitive price we offer to the customer. Thanks to this, for several decades we have been able to occupy a worthy niche in the market. Among our clients there are large corporations, including members of S&P 500 index.
Every year, Allrus expands its partner’s network. We started in the 90s with the supplying of the pumping equipment of the oldest European concern Allweiler, which included plants in the cities of Radolfzell, Bottrop and Utrecht. By the beginning of 2020, we had been cooperating with more than a dozen of leading manufacturers of pumping equipment from around the world, including enterprises of CIRCOR Pumping Technologies (NYSE: CIR), as well as LUTZ, ARGAL, Schurco Slurry Pty Ltd. (former name KETO) and others.
/
2
/
2
Thank you!
Your message has been sent.
Your message has been sent.
Contacts
Our telephone:
Our address
ALLRUS Maschinenhandels GmbH, Campus 21, Brunn am Gebirge / Austria
E-mail
Thank you!
Your message has been sent.
Your message has been sent.